-
The main reasons for the repair of the semi axle in the north of Baotou
2018-01-20
-
Baotou North Benz accessories maintenance common sense automobile daily maintenance
2018-01-20
-
Common sense of heavy truck parts maintenance in North Baotou
2018-01-20
-
North Ben V3 parts maintenance common sense automobile failure phenomenon
2018-01-17
-
Northern Baotou Mercedes Benz accessories maintenance common sense why cylinder pad thickness can not be changed
2018-01-17
-
Baotou North running heavy truck parts maintenance common sense cylinder head bolts have what requirements
2018-01-17
-
North Ben V3 parts maintenance common sense how to check and eliminate diesel engine emissions black smoke
2018-01-16
-
How to deal with the abnormal sound of the bridge in northern Baotou
2018-01-16
-
How to adjust the diesel engine governor with the common sense of Baotou North running heavy truck parts
2018-01-16
-
North Run V3 parts maintenance common sense how to check the exclusion of diesel engine can not start
2018-01-14
-
How to inspect the fracture of steel plate spring by common sense of repair and repair of heavy truck parts in Baotou
2018-01-14
-
How to inspect the fracture of steel plate spring by common sense of repair and repair of heavy truck parts in Baotou
2018-01-14
-
How to diagnose the insufficient motor power of diesel fuel in Baotou
2018-01-13
-
Baotou northern Mercedes Benz fittings maintenance common sense semi shaft oil seal oil leakage and the cause of which
2018-01-13
-
What should be paid attention to when assembling steel plate spring in Baotou North running heavy truck parts
2018-01-13
-
When a car is running, the gear lever automatically jump back to the phenomenon known as neutral transmission gear jumping. The reasons for this phenomenon are as follows: (1) the adjustment of the control rod of the Baotou North running heavy steam parts is not correct, and the gear or the teeth of the cog teeth are worn into conical. (2) the wear and tear of the transmission shaft, bearing or gear are loose and the axial clearance is too large, so that the shaft is moving when the shaft is rotated. (3) the groove of the shift fork shaft and the position ball are badly worn, or the position ball spring is too soft. (4) the gear synchronizer of Baotou North rush parts is worn or damaged, and the gear shift is bending, and the gear shift rod is worn seriously. The methods of eliminating this kind of fault are: (1) when a file is found, the gearshift is still hung in the gear and the engine is extinguished. Check whether the correct adjustment of shift control mechanism; the remove transmission cover check gear and synchronizer; check the Baotou beiben accessories bearing wear loose, the shift fork is deformation or wear, such as the gap is too large to be a shift fork welding deformation correction should be thickened, fork. (2) gear wear into conical should be replaced. The excessive movement of the front and back of the shaft should be adjusted. (3) the gear shift mechanism is not well positioned, and it must be removed from the gear shaft to repair or replace the unqualified parts. (4) the synchronizer is badly worn and should be replaced. The shift fork bending and gear shift rod wear seriously, and correct welding repairs or replacement of new products should be carried out.
2018-01-10
