CONTACT-US

Beiben V3 accessories share with you the importance of changing brake fluid

 

● Braking stability will be affected after long-term use of brake fluid

● The brake fluid will absorb moisture during the use of the vehicle, causing air resistance in the brake pipe and reducing the braking effect

● It is recommended to test and replace the brake fluid once a year

The Beiben V3 parts factory suggests that the brake fluid should be responsible for ensuring the smooth operation of the brake system and driving safety. Due to the long-term use of brake fluid, the stability of vehicle braking will change. Therefore, the brake fluid needs to be replaced regularly. Otherwise, it may not only reduce the braking force of the vehicle, but also lead to braking failure.

Severe overheating will lead to complete failure of braking performance

The squeeze of the brake fluid in the brake pipe creates fluid pressure that connects the brake pedal to the piston of the disc brake caliper or the brake pump of the drum brake. The brake fluid transmits pressure whenever the brake pedal is depressed. The brake vacuum booster supports this process by amplifying the force of depressing the brake pedal.

As the service time of Beiben V3 parts increases, the brake fluid status will be greatly affected by various factors. For example, continuous braking when driving downhill will lead to severe overheating of the brake fluid, and the water molecules in the brake fluid will vaporize after exceeding the boiling point, forming internal bubbles. When the brake pedal is pressed again, although the air bubble and brake fluid are compressed at the same time, the air bubble will block or block the transmission of hydraulic pressure, resulting in brake failure.

The water in the brake pipe of Beiben V3 fittings is also one of the causes of brake failure. The water in the brake fluid follows the air through the vent hole on the brake fluid reservoir cover. When the level of brake fluid fluctuates, the exhaust hole will exhaust and draw in wet air. In addition, when cleaning the engine or vehicle, water will also enter the tank through the exhaust process. The aging of the brake hose and sealing element may also lead to the increase of the moisture content in the brake fluid, because the water enters the brake fluid through the loose part of the seal.

Brake fluid replacement equipment

Generally speaking, the water content of brake fluid is about 0.05%, and this ratio will increase significantly over time. If the water content exceeds 3.5%, we strongly recommend changing the brake fluid as soon as possible, because the brake fluid has reached the wet boiling point. When the water content exceeds 3%, the boiling point of the brake fluid drops to 140-180 ° C. Proper tools will facilitate and stabilize brake fluid replacement.

*Disclaimer: The reproduced content comes from the network. If you have any objection, please contact us in time, and we will delete it.