CONTACT-US

Baotou Beiben Heavy Truck Accessories shares with you that the accelerator pedal has a sense of impact, and three parts may be faulty.

 Accelerator and accelerator have impact feeling, and three parts may be faulty.




After using it for a period of time, the accelerator is often impacted. Inexperienced drivers often find it difficult to judge the source of the fault. The impact on the transmission system can easily lead to early parts damage and poor driving experience.




Baotou Beiben Heavy Truck Accessories Factory in Inner Mongolia counted several reasons for this kind of failure. In the future, if you encounter such failures while driving, you can make your own judgment and inspection, so as to carry out maintenance as soon as possible to avoid big losses.




Baotou Beiben Heavy Truck Fittings has a large gap between traction saddles and strong acceleration and deceleration impact.






Compared with trucks, tractors are prone to the impact failure of accelerator and accelerator, because they are two parts, and their connection point has become a high incidence area. As we all know, the components connecting the towing head and trailer are the towing saddle and the towing pin. If the gap between them is too large, it will have a strong impact on acceleration and deceleration.




So, how should we judge whether the gap between them is large? Actually, it's easy, too. Specific operation method: Pull the trailer hand brake (the air circuit connection between the tractor and the trailer can be disconnected if there is no model), so that the trailer can be braked in place.


Two people work together, one person drives the tractor forward and moves it several times repeatedly, and the other person observes whether there is a relative gap between the tractor and the trailer, if it is easy to observe.




In addition, it is also necessary to observe the combination point of the upper and lower parts of the traction saddle of Baotou Beiben Heavy Truck Accessories, because the upper and lower parts of the saddle are fixed by axle pins. There is a bushing outside the pin, usually made of rubber or nylon. If the shaft sleeve is damaged, it is easy to have a lot of movement, resulting in impact.




What should I do if it is determined that there is a large gap between the towing saddle and the trailer? Don't worry, this problem is generally easy to deal with. There are adjustable screws on the left side of the traction saddle, but ordinary people don't know what to use. In fact, it is to adjust the working clearance of the traction saddle. The internal screw clearance is large and the external screw clearance is small. You can make appropriate adjustments according to the clearance of the vehicle traction plate, but remember to adjust the rear lock nut. If the gap between the shaft sleeves of the upper and lower hinge parts of the traction plate is large, the shaft sleeves and shaft pins can only be removed for replacement and maintenance, but such fittings are generally relatively cheap and the maintenance cost is not high.






* Disclaimer: The reproduced contents are all from the Internet. If you have any objection, please contact us in time, and this website will delete it.