This month is mostly rainy season weather, many vehicle headlamps are accumulated in the fog, serious also appeared water status.  I believe that many drivers have encountered the fog in the headlight of the vehicle headlight, but why do you water in the headlight?  

 This phenomenon often in the rainy season, there may also be a number of personal factors leading to the discharge of headlamps, there are many reasons for the inflow, for example, on the material of the headlight, the sealing ring is not in accordance with the size, the lack of adhesive coating on the side layer and the surrounding environment and other factors.  In addition, no matter what type of headlight, there is a ventilation rubber tube in the rear lid position, and the moisture in the air may also enter the water mist from the inside of the headlight.  

 What are the consequences and effects of the north rush v3 accessories headlamps after water intake?  

 The impact of the north To Run Quickly v3 fittings headlamps water formation fog or long-term water is not to be underestimated, this phenomenon will directly affect the lighting effect of the north To Run Quickly accessories lamps, the service life of the bulbs, appearance quality and so on.  If in the water more than the situation, it is possible to directly lead to short circuit, burning the bulbs, fuses, wiring, at this time the maintenance cost is also quite high.  

 1. the lighter water mist can turn on the headlight for 15 to 20 minutes, and the water mist will disappear automatically.  If the inside water is serious, it is recommended to change the headlight directly.  

 2. in the case of preventive inlet water, a layer of glass cement can be applied to the crack between the rear lamp cover and the light mirror.  

 3. the kayou pro – experiment was told that it seems that the method of using a sponge to plug the snorkel seems to have a good effect, and you can try it out if you can.