CONTACT-US

Baotou North rush spare parts maintenance common sense steering heavy failure, common maintenance and repair are not done well

The steering system is one of the most important systems on the truck, and it can only ensure the safe driving of the whole vehicle.  Like other systems, the steering system inevitably has some faults, and the steering wheel steering is one of the most common failures, if not timely repair will cause the driver energy consumption, emergency direction of the direction difficult to adjust, resulting in the accident.  There are several reasons that can cause a heavy steering, and we will analyse them one by one today.  

 

 The shift to heavy five factors is easy to cause

 

 

 Hydraulic oil: in the steering power system of the truck, the hydraulic oil is the medium of transmission power, and once the system is lack of hydraulic oil, the power transmission will be interrupted, causing a heavy steering.  The Assistance accessories booster pump in the north of Baotou is also lubricated by hydraulic oil, which may also lead to wear and tear.  

 

 Power booster pump damage: the turn to accessory booster pump in the north of Baotou is the source of power, which is responsible for converting the power of the engine into hydraulic energy to drive the steering system.  If it wear damage, it will cause the hydraulic oil output pressure low, difficult to drive the steering gear, resulting in heavy direction.  

 

 Steering gear damage: the damage to the inner leakage of the benchi parts steering gear in the north of Baotou may also be heavy, because it is responsible for transferring the energy from the hydraulic fluid to the mechanical energy, driving the steering mechanism. once the leakage is lost, the energy of the hydraulic oil will be wasted, leading to the steering gear difficult to drive the steering mechanism.  

 

 Filter plugging: in the steering hydraulic system there is a filter hydraulic oil filter, if it occurs a blockage will also cause a heavy steering.  

 

 Steering shaft lack of oil: this failure caused by the steering heavy is very common, usually because of poor grease blocking the oil road, resulting in the injection of butter, causing the vertical shaft dry grinding and even biting, the pressure bearing in this case will soon be damaged.  

 

 How to avoid proper maintenance is king

 

 In fact, most of the reasons for the failure are maintenance problems, because it is easy to cause the damage to the steering pump two reasons, one is using poor-quality hydraulic oil, the other is not to press the replacement of the hydraulic oil filter, both will cause the pump wear damage.  The steering shaft bite is usually caused by the use of poor grease to cause the blockage of the oil road, plus the frequency of filling is too low, is causing the problem to deteriorate.  If attention to these problems in the ordinary maintenance, can largely avoid the occurrence of these problems.  

 

 The selection of good oil in the specified time to carry out the steering system is essential, poor quality oil seems cheap, but easy to cause some trouble, maintenance will cost more resources.  And the other systems of the truck are the same, the pursuit of low prices in maintenance often leads to greater cost.