Transmission system – choose lubricating oil
Most of the mechanical transmission loss transmission system from Baotou beiben heavy truck gearbox accessories and main reducer. The sound of the transmission, heating and the main reducer gear bearings in the wrong adjustment, or clutch slip, causing the clutch assembly heat and driven disk burns, etc., will cause power consumption increases. This part of the power will be converted into heat scattered into the air, resulting in reduced efficiency of mechanical components, and even cause parts damage. Therefore, it is very important to choose the appropriate lubricating oil to prevent the damage caused by excessive friction. The improper choice of transmission oil, such as oil viscosity, wear resistance and viscosity temperature characteristics, can not meet the requirements of different seasons, different conditions of use, will also lead to lower transmission efficiency. If in the same conditions, the use of summer oil in winter, due to the viscosity, lubrication is poor, resulting in friction between the various parts of the increase, resulting in transmission efficiency decreased. Therefore, in the selection of the use of lubricants, be sure to choose their own models, and for different climatic conditions and conditions of use should also pay attention to the selection of suitable oil. In addition, we should pay attention to the relatively large consumption of the clutch plate, to regularly check, timely replacement, to ensure traffic safety.
Travel system – tire maintenance
Whether the wheel hub bearing tightness is appropriate, the front wheel alignment is correct, the tire pressure is normal, will seriously affect the car’s sliding performance. Baotou beiben heavy truck parts hub bearing too tight, will increase the friction wheel; too loose, the wheels in motion is easy to skew or swing, increases the friction between wheel and ground, resulting in a decline in car sliding performance. Suggested that the owners regularly to a professional repair shop in check and adjust the tightness of the hub, the best state to keep working wheels.
The correct positioning of the front wheel, to ensure that the vehicle is running in a pure rolling state, but also to ensure the stability of the vehicle ride and steering portability. If the front wheel positioning is not correct, can cause the car when driving the front wheels roll with a slide, not only make the wheel wear increase, but also to the car when driving with the ground friction resistance increases, resulting in sliding performance worse, increased fuel consumption. A large car in stores now should have four wheel positioning service, the owner can usually do other maintenance or overhaul of the way a four wheel positioning project, time costs are more economical, more important is to improve the safety of.
Tire pressure is also the best in accordance with changes in weather and road conditions in a timely manner to adjust. High temperature conditions can put pressure down to prevent blowout.
Braking system to ensure sensitivity
The performance of braking technology is directly related to whether or not to play the technical performance and reliability, safety and other issues. Good braking performance is a reliable guarantee of safe driving, but also can improve the efficiency of the car. But once the parts in the brake is adjusted properly, or excessive wear conditions, resulting in a decline in automobile brake sensitivity, failure or deviation of the situation. If you have already happened, the owner should adjust to the maintenance point of the braking system and immediately, worn Baotou beiben heavy truck brake parts replacement. Usually the best time to travel by car and try to brake to ensure the normal working condition, and then travel. In addition to several systems respectively for cleaning and maintenance, can also be on the membrane to protect chassis chassis, delaying aging and rust, some of the exotic foreign matter can tap to play a certain role to resist.