CONTACT-US

Reasons for abnormal oil consumption in TEREX spare parts for Terex accessories

 


Reasons for oil consumption

During engine operation, engine oil lubricates various important components (such as turbochargers, pistons, cylinder liners, etc.). During this process, some of the oil will be burned, while others will be evaporated by the engine's high heat and discharged from the respirator. When the engine is suspected to be burning oil, the correct method should be used for oil consumption detection first. At the same time, the working condition of the engine (smoke exhaust, power, lower exhaust, etc.) should be checked, as well as the TEREX spare parts and whether the engine is leaking oil.

The engine oil consumption is generally within the normal range of 0.2% (2 liters of oil are consumed for every 1000 liters of fuel burned).

1. The fit of various engine components has a certain tolerance range, and the differences in assembly tolerances between these components can lead to different oil consumption even for machines of the same model.

2. Due to different equipment operating conditions, there may be differences in oil consumption. The higher the load and temperature of the TEREX spare parts engine, the lower the viscosity of the oil and the more oil enters the combustion chamber.

3. When the machine is operating in tilted or uneven areas, the oil in the oil pan shakes back and forth, constantly colliding with the high-speed rotating crankshaft, forming a mist that is discharged from the ventilation port to the outside, increasing oil consumption.

Reasons for abnormal oil consumption

1. The air filter and oil filter of TEREX spare parts are not replaced properly. Dirty air and oil contaminated by the plate can cause abnormal wear of the piston cylinder liner, which will increase the consumption of oil.

2. Using inferior fuel can generate carbon deposits and harmful substances in the combustion chamber, which can lead to abnormal wear of cylinder liners and pistons and increase oil consumption.

The company mainly deals in Terex spare parts for non highway rigid dump trucks TR100, TR50, TR60, TR353307/3305, and a full range of products. Terex spare parts TR100, MT3700, MT4400, MT5500, Terex spare parts, and other mining dump truck Allison transmission parts, Cummins engine parts, hydraulic seals, high and low voltage harnesses, hydraulic cylinders, machined parts, gears, chassis series parts.

*Disclaimer: The reproduced content is all from the internet. If you have any objections, please contact Terex spare parts in a timely manner. This website will delete it.