Maintenance of mining trucks

1、 Inspection before starting the mining truck

(1) Check if the diesel and engine oil are sufficient and if there are any leaks

(2) Check the operation of the engine and other instruments

(3) Check the status of various control mechanisms, tires, lights, horns, and wipers

(4) Check if the coolant in the cooling system is sufficient and if there are any leaks

(5) Check whether the TEREX spare parts engine, transmission, clutch, and corresponding control mechanisms of the Terex accessories are working properly

(6) Check whether the braking system components are secure and whether the hydraulic pipelines are leaking.

2、 Inspection during operation of mining trucks

(1) Pay attention to the workpiece status of various instruments and indicator lights

(2) Check if the temperature of the engine, transmission, and other systems is normal

(3) Check the tire pressure condition of TEREX spare parts for Terex accessories

3、 Inspection of mining trucks after stagnation

(1) Turn off the main power switch

(2) Add engine oil, fuel, lubricating oil, and lubricate each lubrication point as needed

(3) Check the tire pressure and replenish it to reach the specified pressure

(4) Fuel filters, oil filters, and air filters can be cleaned as needed

(5) Keep the product clean, especially by removing dust from the cylinder fins, oil radiators, and intercoolers

(6) According to the actual situation, the connecting bolts of each support can be tightened

(7) Timely eliminate any faults found during driving and prepare for the next trip

(8) Check whether the articulated and connecting parts between the carriage and the frame are worn or deformed, check the axle sleeve and add lubricating grease

(9) Check whether the TEREX spare parts frame of the Terex accessory is severely deformed, and whether the connecting bolts are loose. If there are any, they should be repaired or tightened

(10) Check if there are any open welds or cracks on the main beam and crossbeam of the frame. If there are any, they should be repaired and firmly welded in a timely manner

(11) Add coolant as needed.

The company mainly sells TEREX spare parts for Terex off-road rigid dump trucks, including TR100, TR50, TR60, TR353307/3305 series products. Terex spare parts include TR100, MT3700, MT4400, MT5500, Terex spare parts, and other mining dump truck components such as Allison transmission parts, Cummins engine parts, hydraulic seals, high and low voltage harnesses, hydraulic cylinders, machined parts, gears, and chassis series.

*Disclaimer: The reprinted content is from the internet. If you have any objections, please contact Terex Accessories TEREX spare parts in a timely manner. This website will delete it.