Engine maintenance

Regular maintenance of the engine is very important! If the use and maintenance of engine oil are in place, it can reduce engine failures by 50% or even more. Any type of lubricating oil will undergo changes in its performance during use. When the engine oil reaches a certain mileage, its performance will weaken or even deteriorate.

If the lubrication performance decreases, it leads to increased wear, clogging of the oil filter element, breaking the filter paper inside the filter element, causing the oil filter element to filter out, leading to engine wear and increasing internal pollution in the crankcase

Of course, when it comes to choosing engine oil, it's not necessarily the most expensive or the best. Choosing the most suitable engine oil for your car is the best choice! The amount of oil is not easily excessive, and it is generally more appropriate to add it to the middle of the scale. Too much or too little is not good for the engine!

Air filter element

As a respirator for engines, the air filter is also important in its use and selection. To achieve frequent inspection, maintenance, and regular replacement. If used improperly, it is easy for the engine to absorb dust, which accelerates engine wear, aging, and leads to power loss! When choosing an air filter element, it is important to purchase a filter element with better quality and reputation, as well as genuine TEREX spare parts from the factory.

As a diesel fuel supply system for engines, maintenance is also required, including regular replacement of diesel filter elements, inspection and cleaning of hand pumps, fuel tanks, and pipelines.

Maintenance of water tanks and pipes

As the most important cooling facility in the engine cooling system, the water tank must be taken seriously. Many brothers do not pay enough attention to the use of coolant, which leads to rusting, scaling, water pipe blockage, and rupture of the water circuit. As a result, the engine water temperature is too high, leading to piston cylinder pulling, steel pad bursting, water blocking ring failure, oil water mixing, bearing pads, engine scrapping, and so on.

As a diesel fuel supply system for the engine, maintenance is also required, including regular replacement of the TEREX spare parts diesel filter element, inspection and cleaning of the hand pump, fuel tank, and pipelines.

Maintenance of water tanks and pipes

As the most important cooling facility in the engine cooling system, the water tank must be taken seriously. Many brothers do not pay enough attention to the use of coolant, which leads to rusting, scaling, water pipe blockage, and rupture of the water circuit. As a result, the engine water temperature is too high, leading to piston cylinder pulling, steel pad bursting, water blocking ring failure, oil water mixing, bearing pads, engine scrapping, and so on.

Inspection and adjustment of TEREX spare parts brake pads for Terex accessories. To regularly check the brake clearance, there is an observation hole at the back of each wheel. When it is found that the brake pads are less than two-thirds, it is necessary to replace them in a timely manner! It is worth mentioning that current vehicles are equipped with water sprinklers, so when replacing brake pads, it is necessary to remove rust and polish all moving parts to achieve flexibility, in order to make the brake pads play a better braking effect.

The company's main business is TEREX spare parts, which specializes in the TR100, TR50, TR60, and TR353307/3305 series of non highway rigid dump trucks. TEREX spare parts include TR100, MT3700, MT4400, and MT5500