When replacing TEREX spare parts, the following points should be followed:

1. When replacing, it should be installed in relatively clean conditions, with no bumps, scratches, burrs or other accessories on the working surface of the parts.

2. Before installing the rubber seal, the appearance quality should be carefully checked and special tools should be used for pressing to prevent deformation caused by knocking.

3. Master the performance specifications and usage requirements of sealing components, regularly replace faulty components, and strictly follow the operating procedures for replacement and installation.

4. When replacing TEREX spare parts, try to use sealant as much as possible and replace them with paint if necessary to achieve the desired sealing effect.

5. The nut should be repaired or replaced with new parts if the thread is broken or loose, and tightened to the specified torque.

7. For thin-walled parts of the side cover, sheet metal cold calibration is used. For easily worn shaft hole parts, metal spraying, welding repair, bonding, mechanical processing and other processes can be used to achieve the original size.

8. Fill in lubricating oil according to regulations, and regularly clean and unblock the air ports and one-way valves for TEREX spare parts.

The company is mainly engaged in TEREX spare parts. It specializes in the full series of products of TEREX off highway rigid dump truck TR100, TR50, TR60, TR353307/3305, TEREX spare parts TR100, MT3700, MT4400, MT5500, TEREX spare parts and other mining Dump truck 'Allison gearbox accessories such as TEREX spare parts Cummins engine accessories hydraulic seals, high and low pressure harnesses, hydraulic cylinders, machining parts, gears, chassis series.

*Disclaimer: The reproduced content is from the internet. If you have any objections, please contact us promptly and our website will delete it.