How to maintain a truck in TEREX mining truck parts sharing article? Maintenance of wiper blades

To ensure driving safety, it is best to replace the wiper blades once a year. When replacing wiper blades, card enthusiasts should not blindly increase the length and width of the wiper blade, as the Chenglong truck has already made the best design for the cleaning field of view. Although extending the length of the wiper blade without permission can increase the visible range of the window view, it will also increase the burden on electrical equipment such as the wiper motor.

Maintenance of the brake system

The braking system of small trucks mainly uses brake oil to transmit braking force, while heavy trucks use pneumatic braking systems. The two should adopt different maintenance methods.

For trucks with oil brakes, the brake oil level should be checked before departure. If you notice a decrease in the oil level, immediately check the brake oil circuit for any leaks. The brake oil will absorb moisture from the air and become ineffective over time, so it is best to replace it once a year.

For pneumatic brake systems, it is important to regularly drain any accumulated water from the system and replace the dryer regularly. The moisture in the pneumatic system can corrode the pipeline and affect the braking effect, and in severe cases, it can even cause the braking system to malfunction. In addition, it is necessary to regularly check the working condition of the air pump and the wear of the air pump belt for timely replacement.

Maintenance of car lights

In the normal maintenance process, pay attention to check whether the side turn light, fog light, brake light, etc. of TEREX mineral card accessories work normally. If the bulb turns black, it should be replaced in time. After checking the car lights, the owner must also check whether the dust cover of the car lights is intact.

If the dust cover of the TEREX mining truck accessory is damaged, rainwater can easily enter during driving, forming a mist inside the lampshade, which greatly affects the brightness of the car lights and may corrode plugs and wires over time. The solution to water mist is to turn on the headlights and use the heat of the light to make the water mist disappear.

Tire maintenance

Firstly, check the tire pressure. Make appropriate adjustments according to the situation. For example, when the road surface is slippery and the weather is hot, the pressure should be lower and the air should not be too full; When the temperature drops suddenly, the tires must be replenished with air pressure to cope with low-temperature road surfaces.

Secondly, it is necessary to check the tires for any signs of damage, such as possible tire cracking, tire gnawing, and wheel hub rib cracks, which should be carefully inspected and replaced if necessary.

Third, the front and rear tires of TEREX mining truck parts have different bearing weights and wear, so the front and rear tires can be replaced after a certain mileage, which can extend the service life of tires.

When driving at high speeds, if a tire bursts, it can cause a major accident, ranging from tipping or shaking your head to overturning. So, it is important to check the condition of the tires before each trip.

These maintenance techniques seem easy to achieve, but the key is to persevere. By doing well in these maintenance techniques, your truck can maintain good condition and the engine life can be effectively extended, helping you run farther and earn more.

The company mainly sells TEREX spare parts for Terex accessories