The tank truck often transports some flammable and explosive oil products, and is also a kind of dangerous goods transport vehicle. Therefore, the newly purchased tank truck needs to apply for a dangerous goods transport certificate. Generally, the dangerous goods transport certificate is handled at the transportation management bureau. It needs to provide the ID card and bareheaded photo of the tank truck owner, fill in the application form provided by the transportation management bureau, and affix the official seal of the unit with dangerous goods transport. Receive training after submission and obtain qualification through examination.

Enterprises engaged in road transport of dangerous goods should update and improve the safety production management system, improve the emergency plan for road transport accidents of dangerous goods, and inspect, supplement, rectify and submit the tank cars and equipment for inspection. The technical grade of Baotou Beiben Heavy Truck accessories tank car shall meet the requirements of Class I car. The tank car's marker light, signboard and front and rear bumpers shall be painted with yellow and black or red and white twill. The tank car shall be equipped with running status recording device and necessary communication tools, namely GPS. In addition, corresponding devices for heat insulation, static electricity conduction and power cut off shall be installed.

The oil tank truck shall be made and pasted with warning signs according to regulations. A notice board shall be installed on the tank car or the rear of the tank body of Baotou Beiben Heavy Truck Accessories, indicating the name, type, tank volume, maximum load capacity, rescue method and enterprise contact number of dangerous goods on the notice board; "Poison" or "explosive" words are sprayed on both sides and rear of the vehicle body; The rear and both sides of the tank car or tank body shall be pasted with reflective tape.

For tank trucks that can carry two or more types of dangerous goods, a notice board shall be made for each type of dangerous goods and used accordingly. The notice board is pluggable. Dangerous goods transport vehicles shall be subject to vehicle safety technical inspection at the public security vehicle management department at the place where the vehicle is registered. Tanks and tankers shall be inspected by the quality supervision department, and relevant employees shall receive training.

Any violation will be ordered to suspend business. It is understood that the Municipal Transportation Management Bureau will establish and improve various basic accounts for the management of road transport of dangerous goods through this special rectification work.

At the same time, it will also strengthen the daily supervision. If enterprises, vehicles and personnel do not meet the transportation conditions, they will be immediately ordered to stop the operation, and reported to the Municipal Transportation Administration Bureau to cancel the road transportation operation license or road transportation license, and take back their dangerous goods transportation signs and signs.

Due to the particularity of the transported substances, the safety requirements for the transportation of oil tank trucks are relatively strict, which mainly comply with the following provisions:

① Measures shall be taken to eliminate static fire, and anti-static device shall be set at the end of the tank.

② During operation, reliable grounding device and protective device for electrostatic conduction path between tank car and liquid receiving equipment shall be provided.

③ Attention shall be paid to the existence of static conductive sheet between two points of the metal pipeline and the connection between the pipeline and the tank body, chassis and tank body. The path resistance between any two points of the pipeline or from any point to the grounding point or from any point on the internal static conductive part of the tank body to both ends of the grounding hose shall meet the requirements of GJB406 (that is, not more than 50 Ω).

④ Electrical components and conductors shall be reliably connected, well shielded and provided with explosion-proof measures.

⑤ The two sides of the tank body shall have eye-catching words (such as "No Smoking") or other obvious signs to prevent fire.

⑥ The exhaust pipe of the engine of the oil tanker is a front-mounted structure, and it should be equipped with a fire cap during use to prevent accidents. The oil tanker must also be equipped with fire extinguishers as a necessary safety measure.

Disclaimer: The reprinted content is from the network. If you have any objection, please contact Baotou Beiben Heavy Truck Accessories in time. This website will delete it.