When the vehicle fault light is on, the vehicle should be parked in a safe area immediately, and other vehicles should not be affected to check the fault. When the engine fault light is on, it is sometimes a false fault. There are many reasons why the engine fault light is on, depending on your ability to distinguish. Terex spare parts, but among the many causes of engine fault, emission fault and non impact operation fault account for a large proportion.

Cause of emission failure:

Poor gasoline quality leads to unqualified emission detection; Poor air quality, early formation of carbon deposition; The oxygen sensor is damaged; The failure of the spark plug or nozzle of the TEREX spare parts causes insufficient combustion, etc.

Causes of non influential operation faults:

The fuel tank cap is not covered; The throttle valve is not cleared by computer after cleaning; A plug is not plugged tightly after modification or maintenance; The engine fault lamp is lit for no reason. In case of emission failure, the mixture is not fully combusted, and the power

Slightly insufficient. However, if it is a non influential operation fault, it will have little or no impact on driving.

When the engine fault light is on, you can observe it yourself. If it is a major fault, it will be accompanied by weak engine, large jitter, high water temperature, multiple fault lights on the instrument panel of TEREX spare parts, etc. At this time, you need to stop the car and wait for professional help.

If only the engine fault light is on, and everything else is normal, you don't have to run around for a while. Some will automatically eliminate it. If you don't, you can drive yourself to the maintenance station to solve the problem.

Disclaimer: The reprinted content comes from the network. If you have any objection, please contact the TEREX spare parts network of Bentrex Accessories in time to delete it.