The weather is getting colder and colder. For example, the night temperature in many parts of the Northeast has dropped to about minus 5 degrees. Many customers also decided to wipe the dust on the firewood, connect the power supply and prepare for heating at night. But do you really know what to check before opening? Today, we will take you to check the accessories of Baotou North Benz, and pay more attention to the inspection before use.

The shell is not clean, and there is a mystery inside.

It is recommended to excavate coal before starting the machine in cold weather.

Many card users will check the casing of the firewood heater before using it, and then light the firewood heater as usual to test whether it really works. But after the ignition, we found that the firewood heater could not work normally, so everyone made a problem.

It is recommended to excavate coal before starting the machine in cold weather.

In fact, the cleanliness of the shell is not important for the firewood heater. Whether the interior of the firewood heater is clean is the main reason to determine whether the firewood heater is good for use, which involves the sorting of the firewood heater and the inspection of its internal structure. At present, the mainstream firewood heaters in the market are basically similar in structure, mainly composed of shell, motor assembly, circuit board, ignition needle, combustion chamber, aluminum, atomization net, temperature sensor and heating needle.

It is recommended to excavate coal before starting the machine in cold weather.

During normal inspection, Baotou North Benz accessories recommend taking the firewood heating out of the housing, removing the circuit board, removing several screws of the aluminum housing, and successfully disassembling the entire firewood heating. After disassembly, the motor assembly, combustion chamber, ignition needle and aluminum interior can be seen. After a winter, the sealed firewood will accumulate a lot of carbon. Moreover, if your use conditions are not good, many sundries can easily be inhaled into the firewood heater and block the atomization screen of the firewood heater, so disassembly and cleaning are very necessary.

It is recommended to excavate coal before starting the machine in cold weather.

In addition, excessive internal carbon deposition will lead to insufficient internal combustion of diesel heating. As time goes by, the firewood heating will become worse and worse, and it simply cannot be used. Therefore, it is recommended that even if your firewood heater can be used normally, Baotou North Benz accessories should also decompose the entire firewood heater before restarting, remove the internal carbon and sludge, so that the firewood heater can work fresh.

*Disclaimer: The reprinted content comes from the network. If you have any objection, please contact us in time, and this website will be deleted.