Baotou beiben heavy truck accessories share with you that most of the national six models, whether trucks or tractors, have begun to be equipped with or choose AMT transmission, but many card friends believe that AMT is not suitable for ordinary users.

The reason also lies in the lack of understanding of AMT, so what is the difference between AMT transmission and manual transmission? Today, Baotou beiben heavy truck accessories manufacturers will briefly talk about

At the national level 6, in order to fully burn the fuel of the engine and avoid premature blockage of DPF, transmission manufacturers began to improve AMT. AMT transmission can grasp more accurate shift timing than manual transmission, so as to better grasp the shift efficiency.

With the progress of domestic heavy trucks, hydraulic retarder, lane keeping system, adaptive cruise system and other configurations have also begun to be applied and popularized in trucks, and the realization of these configuration functions has higher and higher requirements for the transmission. If the manual transmission is used, the normal operation of these configurations will be affected, thus affecting the overall function and convenient operation of the vehicle.

The core components of AMT are mainly actuator, TCU electronic control unit and Baotou beiben heavy truck accessory sensor. When the driver expresses his operation intention through the handle, pedal and other parts, the TCU control unit calculates the command to the AMT system after determining the current state. The solenoid valve on the executive part will work according to the command of TCU to realize the separation and combination of clutch and gear selection operation. At the same time, each sensor in the system feeds back the current data to TCU to realize closed-loop control.

*Disclaimer: the reprinted content is from the network. If you have any objection, please contact us in time, and this website will delete it.