很Many friends feel the steering wheel shaking when driving. What is the reason for this? The manufacturer of beiben V3 accessories is introduced as follows:

A. High speed jitter.

If you have problems driving at high speed, it is likely that there is something wrong with your car's transmission system. At this time, you should go to the repair shop first to check whether the positioning angle of each tire is in the standard state. If not, adjust as soon as possible!

b. Shaking when turning the steering wheel.

If only the direction jitters, the timing belt may be too loose or too tight. Hydraulic vehicles are prone to this problem. This is not a big problem, but it should be adjusted in time.

C. At high speed, the steering wheel suddenly shakes.

This is caused by you hitting the brake too often and too hard. The temperature of the brake pad is too high, and it will deform after cooling! At this time, change a beiben V3 accessory brake disc. Or the brake disc doesn't need to be replaced. Polish it to return to normal use!

d. The steering wheel vibrates at a specific speed.

The steering wheel vibrates at every driving speed. This is why the tyres need to be dynamically balanced! Perform dynamic balancing in time. Otherwise, the consequences will be unimaginable! There are many reasons. Beiben V3 accessories, such as deformed wheel hub, unstable tire pressure, improper proportion of balance weights, etc!

e. The potholes tremble.

If you feel that the steering wheel vibrates at the low end with potholes, don't think it's a natural phenomenon. It may be because the pull rod head is severely worn. Or the shape of the tire has changed a little. At this point, check.

6. zinc paste bending balance weight.

The product adopts metal zinc die casting, the surface is treated with epoxy resin electrostatic spraying, and the back side is pasted with edge tape, which is environmentally friendly, beautiful, durable and easy to operate. At present, we are a company producing this product, which is our characteristic.

Usage: when the working environment temperature is above 16 ℃, clean the hub and keep it dry. According to the grams displayed by the balancing machine, select the balancing weights with different weights (they can be broken or cut short with scissors along the straight line, and each total gram divided by each block = single weight), tear off the plastic protective film on the back, paste and press directly, and the pasting strength will reach 80% in 24 hours and 100% in 72 hours.

Note: the speed of dynamic balance shall not exceed 60km / h within 24 hours, otherwise it is easy to fall off, and it can be driven normally after 72 hours.

*Disclaimer: the reprinted contents are from the network. If you have any objection, please contact us in time, and the network will delete them.