Next, the Baotou beiben heavy truck parts manufacturer introduces several methods to check the shock absorber failure, hoping to help you.

1. if the vehicle vibrates violently during slow driving and emergency braking, it indicates that there is a problem with the shock absorber.

2. press the bumper and release it. If the car jumps for 2-3 times, the shock absorber works well.

3. remove the shock absorber of Baotou beiben heavy truck accessories, erect it, clamp the lower connecting ring on the pliers, and pull the shock absorber rod several times. At this time, there should be stable resistance. The resistance of upward pulling shall be greater than that of downward pressing. If the resistance is unstable or there is no resistance, the shock absorber may lack oil or the valve components may be damaged. Repair or replace the components.

4. stop the vehicle after driving for 10km on the road with poor road conditions, and touch the shock absorber housing with your hand. If it is not hot enough, it means that there is no resistance inside the shock absorber, and the shock absorber of Baotou beiben heavy truck accessories does not work. At this point, the appropriate lubricant can be added and then tested. If the housing is hot and the shock absorber is short of oil, add enough oil.

*Disclaimer: the reprinted contents are from the network. If you have any objection, please contact us in time, and the network will delete them.