The water ingress of automobile headlamp accessories often occurs in rainy and foggy weather. How to solve this situation? There are two common reasons for water ingress in the headlamp of Baotou beiben heavy truck accessories:

There is a ventilation rubber pipe at the rear cover of the headlamp, which is used to discharge the heat released during the headlamp and use, so as to ensure the stable operation of the headlamp. Because the pipe is connected to the outside world, and the temperature difference between the inside and outside of the headlamp is large, it is easy to cause water to enter the interior of the headlamp, resulting in fog.

When the vehicle passes through the water section or washes the car, the pit will also cause water to enter the vehicle headlamp. This is mainly because when wading in water and washing the car, the accessory engine of Baotou North Benz in Inner Mongolia may get wet. When Baotou beiben heavy truck engine works, water evaporates to form water vapor, which then enters the headlamp through the rubber tube.

If there isn't much water, don't worry too much. The water vapor can be discharged through the temperature of the headlight without causing damage to the headlight. However, some riders may be worried about baking. This is wrong and can easily damage the headlights. This is because the appearance of the headlamp is plastic. It is easy to bake the lamp shade with extra heat, and most of these damages are irreparable.

However, if there is too much water in the headlamp of auto parts, turn on the headlamp, drain the water, and wait until it is dry before checking for damage. If there is no exception, you can install it back. This condition may be related to poor headlamp sealing.