The long term use of the hose of the engine radiator will be aging and easy to break. If the Baotou North running heavy steam radiator is flooded, the hose is broken during the driving process and the high temperature water spatter will form the large mass of water vapor from the engine cover. Emergency measures are solved.

In general, when the Baotou North run heavy steam fittings radiator enters the water, the hose joints are most prone to crack and leak, then the damaged parts can be cut off with scissors, then the hose is reinserted into the radiator intake joint, and the card or wire is tightened. If the crack is in the middle part of the hose, you can use the rubber cloth to tie the leaking hole and wipe the hose clean before it is wrapped. After the leakage part is dry, the rubber cloth is wrapped around the water leakage of the hose. Because the water pressure in the hose is high when the engine works, it is necessary to tighten the rubber cloth. If there is no adhesive tape on hand, you can first wrap the plastic paper on the crack, then cut the old cloth into strips and wrap it around the hose. Sometimes the hose has larger cracks, and it may leak after wrapping. At this time, the lid of the water tank can be opened to reduce the pressure in the channel and reduce leakage.

After taking the above measures, the engine speed can not be too fast, we should try to hang upscale driving. In the course of driving, we should pay attention to the pointer position of the water temperature meter of Baotou North rush parts, and find that when the water temperature is too high, it is necessary to stop the cooling or supplement the cooling water.