1, bearing the running part of the oil tank, the popular saying is the chassis. The general driver for this piece of comparison, the problem is that the oil tank car after the loading of oil pump, we installed the engine drive shaft, force, with these 2 devices we need special attention in the operation, the improper operation of the force is scrapped.

2. The use and maintenance of Baotou Bei Ben heavy duty truck oil pump is strictly carried out according to its operation and maintenance instructions.

3, the use and maintenance of dispensers, please strictly follow their instruction manual, with instructions.

4. Oil is slow and oil is not available. Please check the safety valve and filter net. These should be checked and cleaned regularly.

5. The oil tank and pipe system should be cleaned regularly. Regularly check whether the connection points of Baotou Bei Ben heavy truck fittings piping system are well connected and reliable.

6, in order to ensure that the oil tank is clean, the oil tank and the oil delivery system should be regularly cleaned. The inner and outer joints of both ends of the oil hose should be lubricated regularly, which is easy and convenient to assemble and disassemble. Every time the oil pipe is finished, both the outer and outer cover (Du Gai) should be covered in time, and the ends of the oil hose should be closed to ensure that the tubing is clean.

7, the load of oil should not exceed the rated loading quality. (according to the density of oil).

8, the medium through the ball valve should not be dirty, in order to protect the seal ring and improve the service life of the ball valve. The ball valves should not work in the semi closed and semi open state for a long time, otherwise the seal ring can be deteriorated easily, and the handle of the ball valves in the driving should be in the closed state.

9. The inlet and drainage network should be frequently disassembled and washed to prevent the oil sludge from blocking the filter screen and affecting the flow rate.

10, the breathing valve should be kept clean so that the breathing valve is in working state, and the spring inside the valve can not be changed at will, so as not to affect the effect of suction and deflation. When the breathing valve is blocked, there is danger of deformation of the tank.

11. In order to prevent the oil truck from the fire accident, in Baotou north of the heavy steam fittings exhaust pipe, muffler damage, pipeline oil leakage, conductive pole bad or break, no metal items are allowed to knock on the components on the oil truck, so as to avoid the formation of Mars, oil trucks should be ready to fire firewood at any time.

12. If the tank is frozen under the tank, it must not be baked by fire. It can be thawed by melting hot steam or driving the car into the greenhouse.

13, before the operation of the tanker, it is necessary to use the pole to be inserted into the wet land. The ground rubber belt should be grounded.

14. Check the fire extinguisher before leaving the car. The users of the tanker should be familiar with the use of the fire extinguisher and check and maintain it according to its instructions.

15, before the operation of the tanker, check whether the pipeline system is leaking oil, whether the grounding wire is disconnected, and whether the exhaust pipe is damaged.

16, oil measurement should be carried out in accordance with the relevant regulations. In winter, if there is water in the self priming pump, the water must be exhausted to prevent the frost from breaking the pump body.

17. When you need to work in the oil tank, you should pay attention to the good ventilation and protect people outside the tank. If necessary, wash the tank with soap and water and then operate.