Pay attention to waterproof, moisture-proof, dustproof and anti magnetic interference.

No impact or impact is strictly prohibited. No liquid should be cleaned. (ECM printed circuit board outsourcing a layer of steel shell, damage to the shell, even if a slight bump deformation, may cause serious consequences).

Do not disassemble the electronic control module (ECM) plug, nor touch the metal pin with your hands. Static electricity may damage the ECM circuit.

All ECM joints must be sealed well. The damage of the joint or seal must be replaced by the ECM grounding wire and the cylinder body. It must ensure that the grounding wire is firmly connected and the action of the ECM4 pin should be crisp and powerful, otherwise the ECM can be damaged by fire.

Before you insert the harness connector of Baotou North Mercedes Benz parts sensor or actuator, remember to turn off the ignition switch and power switch of Baotou North Mercedes spare parts first.

Clean the oil and dust accumulated on the wire harness regularly with clean and soft cloth, and keep the harness and the dry cleaning of the connecting part of the North Baotou Mercedes Benz accessories sensor or actuator.

All the connectors are not allowed to be brutally operated when they are installed or pulled out. Ensure that the locking device is inserted in place and there is no foreign body in the socket.

When conducting welding work, it is necessary to turn off the main power and unplug all the plugs on the ECM.

Pay attention to waterproof, moisture-proof, dustproof and anti magnetic interference.

No impact or impact is strictly prohibited. No liquid should be cleaned. (ECM printed circuit board outsourcing a layer of steel shell, damage to the shell, even if a slight bump deformation, may cause serious consequences).

Do not disassemble the electronic control module (ECM) plug, nor touch the metal pin with your hands. Static electricity may damage the ECM circuit.

All ECM joints must be sealed well. The damage of the joint or seal must be replaced by the ECM grounding wire and the cylinder body. It must ensure that the grounding wire is firmly connected and the action of the ECM4 pin should be crisp and powerful, otherwise the ECM can be damaged by fire.

Before you insert the harness connector of Baotou North Mercedes Benz parts sensor or actuator, remember to turn off the ignition switch and power switch of Baotou North Mercedes spare parts first.

Clean the oil and dust accumulated on the wire harness regularly with clean and soft cloth, and keep the harness and the dry cleaning of the connecting part of the North Baotou Mercedes Benz accessories sensor or actuator.

All the connectors are not allowed to be brutally operated when they are installed or pulled out. Ensure that the locking device is inserted in place and there is no foreign body in the socket.

When conducting welding work, it is necessary to turn off the main power and unplug all the plugs on the ECM.