The clutch is the assembly directly connected with the engine in the transmission system. The active part is connected with the engine flywheel, and the driven part is connected to the transmission. The specific functions are as follows: the following three aspects:

1. the engine and the transmission system is gradually joined to ensure a smooth start of the car. When the vehicle starts, the clutch will gradually engage (at the same time, gradually increasing the opening of the accelerator pedal will increase the output torque of the engine), and the torque it can transmit will also gradually increase. So the torque of Baotou North Mercedes accessories engine can be transferred from small to the earth to the driveline. When the traction force is enough to overcome the driving resistance, the car will start slowly and gradually accelerate from static to achieve a smooth start.

2. temporarily cut off the connection between the engine and the transmission system so as to facilitate the starting of the engine and the shift of the transmission. When the engine is cold start, let Baotou North Mercedes spare parts clutch cut off the connection between the engine and the driveline, so that it can remove some resistance, improve the starting speed and increase the starting success rate. In the course of driving, in order to adapt to the changing driving conditions, the transmission system often needs to be replaced by different gears, and the shift of the real inkstone gear transmission. A gear pair that is originally used as a gear is exited and then the gear pair in another gear is entered into work. The clutch pedal must be stepped before the shift, and the power transfer is interrupted so that the mesh pair of the original gear can be removed and changed into the new position.

3. limit the torque transmitted to prevent overloading of the transmission system. When the car brakes, if there is no clutch, engine and transmission system will sharply reduce the speed and rigidly connected, and in which all parts will have a great moment of inertia (its value may be much higher than the normal maximum torque generated when the engine is working), caused by load carrying capacity than the transmission system. Mechanical damage. With clutch, we can rely on the relative motion between the active part and the driven part of Mercedes Benz parts assembly in northern Baotou to eliminate this danger, so as to prevent the transmission system from overloading and play a certain protective role.