The safety problem of loading and transportation of dangerous goods has been all our attention, to ensure the safety of transportation is imperative, following Baotou Benz accessories are the matters needing attention for the shipment of all kinds of dangerous goods we must master the finishing:

Flammable liquids

1. No oxidants, natural substances, strong bases and other residues in the carriage.

2, containing flammable liquids or drums from high rolling truck, truck from rolling or rolling operation, measures should be taken to prevent Mars, surrounding people are required to prevent collusion, drums crash damage.

3, when the steel packaging multi layer loading, interlayer must take appropriate gasket, and should be tied firmly.

4, the low boiling point or easy polymerization of flammable liquids, such as found with the expansion of the packing container (drum) phenomenon, by the consignor to change the packing before it can continue loading.

5, the tank (tank) car handling, Baotou Benz accessories to tighten the hand brake, fixed wheel, turn off the engine, the total power cut off device, connect the conductive antistatic device, the operation personnel shall not leave the post, night handling explosion-proof lighting equipment application.

Two, explosive

Transport vehicle compartment floor should be flat and intact, with iron loading, should take protective measures such as bedding cushion, wood, plywood, rubber plate, no acid and alkali, oxidant and other residues. When loading and unloading, operators may not bring fire or wear shoes with nails and easy to produce static work clothes. Don't fall, roll, prevent friction, impact and violent vibration during operation. No contact with open fire, high temperature, no use of iron tools.

Can stack items, according to the transportation package icon logo on the display, the highest part of the board will more than the period of less than one-third of the package. After loading should be covered with tarpaulin tightly, firmly tied up, van stacking total height of not more than 1.5 meters, the use of mechanical loading and unloading operations, should be required to load 2% load reduction. Avoid insolation, rain, high temperature and open fire during transportation. When there is a thunderstorm on the way, stay away from trees, electric poles or buildings, to prevent lightning stroke. When the team transportation, should appoint a person responsible for the unified refers to, between vehicles to maintain a safe distance. When parking, the parking place should be chosen strictly, away from high voltage, fire source and high temperature, and should be separated from other vehicles.

Three, compressed gas and liquefied gas

With oil pollutants and 1 compartment, not acid residue.

2, when loading to tighten the cap, protect the cylinder valve to prevent the car crashed; personnel shall be the personnel on the car of the bottle is properly placed, can continue to car bottling. In the same carriage, no two persons can be bottled separately. Except for the cylinders (such as liquefied petroleum gas) that are allowed to be erected, the cylinders on the vehicle should be transversely laid, loaded and balanced, properly fixed to prevent rolling. The valve should be at a party, the upper cylinder shall not exceed the height of the carriage sideboard.

3, loading and unloading operation, do not put the valve body alignment, pay attention to prevent the safety bottle cap fell off, the cylinders should be erected to rotate, not sell bottles or roll pass, cylinders must be safe immediately.

4, shipment of large cylinder (containing more than 0.5 tons in weight of the container) or when the cylinders between bottles and bottles, pallets and pallets should fill the prison cork, pallet jack should be driving toward the right, there is a fixed support in the car after the baffle plate and the cylinder gap must be, and have a tight rope fastening, prevent the cylinder rolling, heavy loaded multilayer bottles are not allowed.

Four, corrosive goods

Before the work load wear corrosion protective equipment of volatile toxic vapour or smoke, should be equipped with gas masks, and should carefully check the packaging (including sealing) is good, no leakage. Especially to prevent the outer packing from being broken. The liquid corrosion products should not be shoulder, bear, avoid rolling, friction, fragile container packaging shall not stack. With oxidizing substances, shall not contact high temperature, open flame. When there is a thunderstorm on the way, stay away from trees, electric poles or buildings, to prevent lightning stroke. When the team transportation, should appoint a person responsible for unified command, between vehicles to maintain a safe distance. When parking, the parking place should be strictly selected, away from the high voltage power supply, fire source and high temperature places, and should be separated from other vehicles, with special supervision.

Before the work load wear corrosion protective equipment of volatile toxic vapour or smoke, should be equipped with gas masks, and should carefully check the packaging (including sealing) is good, no leakage. Especially to prevent the outer packing from being broken. The liquid corrosion products should not be shoulder, bear, avoid rolling, friction, fragile container packaging shall not stack. Oxidbillity items shall not be in contact with combustible material and reducing agent, organic corrosion products prohibited contact with flame and high temperature or oxidizing agent, alkaline and acid corrosion products should not be mixed, mixed inorganic acid corrosive and no organic acid corrosive.Five flammable solids

1, when loading and unloading operations, shall not throw, roll, throw, throw.

2. No acid, grease and oxidant residue can be left in the carriage before loading.

3, the loading and unloading operation site must be far away from the fire, heat source, operators may not bring fire and wear shoes with nails.

4, prohibited the use of easy to produce sparks iron tools, loading and unloading machinery should be fire-resistant flower device.

5, rain and snow days, no rain and snow equipment, strictly prohibit the shipment of wet flammable goods.

Six. Oxidants and organic peroxides

1. Before the loading, there is no acid or soft combustible residue in the car parts of Baotou North Benz fittings, and should be far away from the fire and heat source when loading and unloading. Think too much, the heart is not broad enough, the point of care is too low, heart, know things do not matter, but the heart has been difficult to forget, not happy,

2, loading and unloading operation shall not fall, drag, friction and violent rolling, shall not use iron tools.

3, with strong oxidizing agents or stacking packaging drums, stacking must, must have the safety measures between container liner.

4, trolley and fork car wheels, rubber and other non-metallic materials production, loading and unloading tools may not be residual or stained with impurities, pallets and trolleys as special as possible, loading and unloading machines should prevent Mars generated device.

5, transport speed should not be too fast, not forced overtaking.

6. The substance that needs to be controlled by temperature should not use liquid air and Liquid Oxygen as refrigerant when taking refrigeration measures.

Seven, there are drugs

1, the shipment should be carefully checked before packaging, found leakage, damage prohibited shipment.

2, to just open doors, closed containers, carriage to air first.

3, loading and unloading, loading must wear appropriate protective equipment, to prevent ingestion, inhalation and skin contact caused by poisoning.

4, when the amount of work is large and the time is too long, the operation should be rotated or intermittently.

5, during or after work, hand face without eating, drinking and smoking are not allowed by the cleaning and disinfection.

6, small package or beyond the carriage sideboard goods will cover tarpaulin or net cover, tied up, to prevent lost in transit.

7, there are prohibited drugs and edible, medicinal and daily necessities equivalent car assembly.

8, after the shipment of vehicles and tools should be strictly cleaned and disinfected, without the safety management personnel inspection and approval, not allowed to transport food, medicinal and daily necessities.

Only when we grasp the precautions of the above 7 dangerous goods loading and unloading, can we complete the transportation task better.

The safety problem of loading and transportation of dangerous goods has been all our attention, to ensure the safety of transportation is imperative, following Baotou Benz accessories are the matters needing attention for the shipment of all kinds of dangerous goods we must master the finishing:

Flammable liquids

1. No oxidants, natural substances, strong bases and other residues in the carriage.

2, containing flammable liquids or drums from high rolling truck, truck from rolling or rolling operation, measures should be taken to prevent Mars, surrounding people are required to prevent collusion, drums crash damage.

3, when the steel packaging multi layer loading, interlayer must take appropriate gasket, and should be tied firmly.

4, the low boiling point or easy polymerization of flammable liquids, such as found with the expansion of the packing container (drum) phenomenon, by the consignor to change the packing before it can continue loading.

5, the tank (tank) car handling, Baotou Benz accessories to tighten the hand brake, fixed wheel, turn off the engine, the total power cut off device, connect the conductive antistatic device, the operation personnel shall not leave the post, night handling explosion-proof lighting equipment application.

Two, explosive

Transport vehicle compartment floor should be flat and intact, with iron loading, should take protective measures such as bedding cushion, wood, plywood, rubber plate, no acid and alkali, oxidant and other residues. When loading and unloading, operators may not bring fire or wear shoes with nails and easy to produce static work clothes. Don't fall, roll, prevent friction, impact and violent vibration during operation. No contact with open fire, high temperature, no use of iron tools.

Can stack items, according to the transportation package icon logo on the display, the highest part of the board will more than the period of less than one-third of the package. After loading should be covered with tarpaulin tightly, firmly tied up, van stacking total height of not more than 1.5 meters, the use of mechanical loading and unloading operations, should be required to load 2% load reduction. Avoid insolation, rain, high temperature and open fire during transportation. When there is a thunderstorm on the way, stay away from trees, electric poles or buildings, to prevent lightning stroke. When the team transportation, should appoint a person responsible for the unified refers to, between vehicles to maintain a safe distance. When parking, the parking place should be chosen strictly, away from high voltage, fire source and high temperature, and should be separated from other vehicles.

Three, compressed gas and liquefied gas

With oil pollutants and 1 compartment, not acid residue.

2, when loading to tighten the cap, protect the cylinder valve to prevent the car crashed; personnel shall be the personnel on the car of the bottle is properly placed, can continue to car bottling. In the same carriage, no two persons can be bottled separately. Except for the cylinders (such as liquefied petroleum gas) that are allowed to be erected, the cylinders on the vehicle should be transversely laid, loaded and balanced, properly fixed to prevent rolling. The valve should be at a party, the upper cylinder shall not exceed the height of the carriage sideboard.

3, loading and unloading operation, do not put the valve body alignment, pay attention to prevent the safety bottle cap fell off, the cylinders should be erected to rotate, not sell bottles or roll pass, cylinders must be safe immediately.

4, shipment of large cylinder (containing more than 0.5 tons in weight of the container) or when the cylinders between bottles and bottles, pallets and pallets should fill the prison cork, pallet jack should be driving toward the right, there is a fixed support in the car after the baffle plate and the cylinder gap must be, and have a tight rope fastening, prevent the cylinder rolling, heavy loaded multilayer bottles are not allowed.

Four, corrosive goods

Before the work load wear corrosion protective equipment of volatile toxic vapour or smoke, should be equipped with gas masks, and should carefully check the packaging (including sealing) is good, no leakage. Especially to prevent the outer packing from being broken. The liquid corrosion products should not be shoulder, bear, avoid rolling, friction, fragile container packaging shall not stack. With oxidizing substances, shall not contact high temperature, open flame. When there is a thunderstorm on the way, stay away from trees, electric poles or buildings, to prevent lightning stroke. When the team transportation, should appoint a person responsible for unified command, between vehicles to maintain a safe distance. When parking, the parking place should be strictly selected, away from the high voltage power supply, fire source and high temperature places, and should be separated from other vehicles, with special supervision.

Before the work load wear corrosion protective equipment of volatile toxic vapour or smoke, should be equipped with gas masks, and should carefully check the packaging (including sealing) is good, no leakage. Especially to prevent the outer packing from being broken. The liquid corrosion products should not be shoulder, bear, avoid rolling, friction, fragile container packaging shall not stack. Oxidbillity items shall not be in contact with combustible material and reducing agent, organic corrosion products prohibited contact with flame and high temperature or oxidizing agent, alkaline and acid corrosion products should not be mixed, mixed inorganic acid corrosive and no organic acid corrosive.Five flammable solids

1, when loading and unloading operations, shall not throw, roll, throw, throw.

2. No acid, grease and oxidant residue can be left in the carriage before loading.

3, the loading and unloading operation site must be far away from the fire, heat source, operators may not bring fire and wear shoes with nails.

4, prohibited the use of easy to produce sparks iron tools, loading and unloading machinery should be fire-resistant flower device.

5, rain and snow days, no rain and snow equipment, strictly prohibit the shipment of wet flammable goods.

Six. Oxidants and organic peroxides

1. Before the loading, there is no acid or soft combustible residue in the car parts of Baotou North Benz fittings, and should be far away from the fire and heat source when loading and unloading. Think too much, the heart is not broad enough, the point of care is too low, heart, know things do not matter, but the heart has been difficult to forget, not happy,

2, loading and unloading operation shall not fall, drag, friction and violent rolling, shall not use iron tools.

3, with strong oxidizing agents or stacking packaging drums, stacking must, must have the safety measures between container liner.

4, trolley and fork car wheels, rubber and other non-metallic materials production, loading and unloading tools may not be residual or stained with impurities, pallets and trolleys as special as possible, loading and unloading machines should prevent Mars generated device.

5, transport speed should not be too fast, not forced overtaking.

6. The substance that needs to be controlled by temperature should not use liquid air and Liquid Oxygen as refrigerant when taking refrigeration measures.

Seven, there are drugs

1, the shipment should be carefully checked before packaging, found leakage, damage prohibited shipment.

2, to just open doors, closed containers, carriage to air first.

3, loading and unloading, loading must wear appropriate protective equipment, to prevent ingestion, inhalation and skin contact caused by poisoning.

4, when the amount of work is large and the time is too long, the operation should be rotated or intermittently.

5, during or after work, hand face without eating, drinking and smoking are not allowed by the cleaning and disinfection.

6, small package or beyond the carriage sideboard goods will cover tarpaulin or net cover, tied up, to prevent lost in transit.

7, there are prohibited drugs and edible, medicinal and daily necessities equivalent car assembly.

8, after the shipment of vehicles and tools should be strictly cleaned and disinfected, without the safety management personnel inspection and approval, not allowed to transport food, medicinal and daily necessities.

Only when we grasp the precautions of the above 7 dangerous goods loading and unloading, can we complete the transportation task better.