Although the cold winter, but there are still some vehicle engine high temperature engine failure due to severe water shortages (coolant) caused serious damage to the engine cylinder pad fault repair, after many drivers found that the vehicle is easy to heat again.

Remove the engine itself, there is a need to pay more attention to the phenomenon, that is "anti tank". Many people mistakenly think tank defection is a precursor to cylinder pad damage, but often there is another easily overlooked problems — water blocking.

Causes of frequent high temperature

Is the main engine cooling system, the scale of cylinder block and cylinder head and other parts of the abscission after blockage to the water tank radiator channel, and it is difficult to remove by conventional method, the engine cooling system circulation.

The principle of clogging

The principle of clogging is similar to the kettle boiling water, usually in the process of boiling water, the kettle after careless drying, the bottom of the pot of metal and scale will be heated to produce physical changes, scale will fall off.

Similarly, Baotou beiben engine accessories in the absence of the cooling water cooling conditions, scale deposition surface of the cylinder body, impurities will eventually fall off, with the cooling liquid circulation to the water tank compartment, causing Baotou beiben radiator accessories channel blockage.

Usually this kind of jam, bigger impurities, chemical cleaning agent used in general is very difficult to completely remove the tank, need to go to a professional maintenance department, dismantling tank thoroughly cleaned, it is "water", the best effect of the artificial water tank cleaning method of physics.

Remind: often high temperature vehicles, need to pay special attention to Baotou North Ben heavy truck parts radiator surface cleaning and maintenance, radiator surface heat sink damage should be repaired in time, keep ventilation. When washing the car, it is forbidden to flush the surface with a high pressure cluster of water columns. The normal water tank external maintenance, should use neutral cleaning agent, scrub the surface after washing with water, if necessary use compressed air drying, installation check insect nets.