The road is a lot of people driving the most annoying thing, city traffic congestion will show more often, it seems everyone is flattering, forcing the driver might have to be at a low speed or idle state, in which virtually increase the carbon deposition conditions. Today, talk about how to prevent carbon deposition.

The main influence of carbon deposition

The intake pipe, engine valve, fuel injector and piston carbon will cause the following: engine power decline, daily fuel consumption increased, cold start difficult, idle instability and knock, emissions exceeded.

When the door will affect the solar term carbon flow, influence of closed, and even lead to a low pressure cylinder; and the nozzle effect of carbon product is the most direct fuel supply shortage; piston carbon will be severe on the piston and the cylinder wall caused by leakage or even scratch the death of piston ring.

1, do not idle for a long time

Idling speed, small air entering the engine, the engine can not be effectively accumulated in the carbon is blown out, and idle running is not conducive to the engine temperature, when the engine temperature is low, will speed up the formation of carbon deposition. The air conditioner is running at idle speed, which will cause load on the engine. But if you wait for just a few minutes, there's no need to stall. Because the restart of the moment, not only high fuel consumption, but also the engine will cause wear.

2, low speed

Low speed gear shift is often called "drag", the car is easy to knock, combustion is not sufficient, resulting in carbon deposition. But it is not necessary to improve the gear shifting speed, which will increase the fuel consumption and cause premature wear of the clutch disc of Baotou North clutch.

3, regular inspection and maintenance engine

I heard a lot of use of inferior oil to engine "cylinder" news. In short, the engine oil is the "blood", but also with the condition of the use, is not to say that a price as high as possible, refer to the vehicle mileage, driving environment, self suction or turbine, to develop suitable for car maintenance packages. In addition, pay attention to the northern part of Baotou Benz spare parts to spark plugs, oil, inlet and other easy to accumulate carbon parts to do a check and cleaning, as much as possible to reduce carbon deposition.

4. Pay attention to the time of car killing

In the vehicle engine flameout, if the vehicle low speed running time is long, deep on several feet in the neutral position before shut off the throttle, engine by high speed impact the carbon deposition, such as stable operation after flameout. At high speed or climbing is not immediately after flameout, especially turbocharged models (turbocharged vehicle carbon formation faster than the general naturally aspirated vehicle to hundreds of times faster), as far as possible in the idle for a few minutes after the engine flameout.

5, running high speed

In theory, the idle acceleration of the accelerator will wash away some carbon deposits, but this method is not recommended. The first is to waste fuel and pollute the environment; second, idling is bad for the engine. Really want to rely on air flow wash carbon deposition, or to run high speed bar!

Summary: finally stressed that Baotou North Benz accessories engine carbon deposit is a normal phenomenon, can not be avoided, if the phenomenon is not serious, blindly do some so-called clean project, not only the price is not high, but in other parts of the car may be damaged. But if you do not pay attention to, will have a negative impact on the power, fuel consumption. Or should we give priority to prevention?.