Select the oil and oil filter to keep clear
Different grades of lubricants in the use of oil will change. When the oil passes through the pores of the oil filter element, the solid particles and viscous substances in the oil are accumulated in the filter. Such as filter plugging, oil can not be smoothly through the filter, the filter will burst or open the safety valve, the bypass valve through, still the dirt back to the lubricating parts, promote accelerated engine wear, increased pollution inside.
Do not add less oil, but do not want to add, not the more expensive the international brand of oil is better for your car’s oil is the best lubricating oil of different grades in the process of using oil will change. Oil from the oil through the pores of the filter, the oil in the solid particles and viscous products in the filter, so the summer oil filter replacement is equally important.
Reasonable selection of coolant
To avoid the Baotou North heavy truck parts engine tank rust, scaling, it is necessary to pay attention to the selection of coolant. Some owners do not attach importance to the use and quality of cooling water, usually added to the tank is only ordinary water. Cooling system is the most common rust, scaling, corrosion and other issues. The main reason for this is that there is no good coolant.
The coolant is not only good with low pour point, and other ingredients, can inhibit foam, anti rust, anti electrolysis and scale proof and so on, so the car still remind the main coolant tank to carefully select the useful.
Thermostat adjustment
Summer external temperature is too high, it is necessary to pay attention to the north through Baotou heavy truck parts thermostat adjustment. The thermostat in the outlet of the engine, its role is to adjust the cooling intensity, the engine temperature is low, large circulating water is truncated small circulation water, the temperature of the engine to quickly increase the amount of cooling; the engine temperature to a set temperature, the thermostat will cycle through water, shutting down small circulating water.
If the thermostat can not be connected to the large circulation of water, resulting in poor circulation of cooling water, cooling water absorption of heat can not be brought to the radiator and the engine overheating. Check and remove the method: remove the thermostat, into the hot water, when the temperature reached 70 degrees Celsius, the main valve should start to open, at 80~86 DEG C should be fully open, the valve height is generally not less than 9mm. If it does not meet the requirements, it should be repaired or replaced.
Intake system to keep clean
Baotou North heavy truck parts engine intake system is mainly composed of two parts of the air filter and the intake pipe. Depending on the use of the situation, to regularly clean the air filter, cleaning cycle can be determined by the daily driving area of air quality. Buy a good quality manufacturers to provide the original factory is also very important air filter element.
If the vehicle is often traveling in the summer dust, air quality is poor road area, it should be noted that the North washed heavy truck parts of the air intake pipe, to ensure the smooth flow of air. If the intake pipe is too dirty, will lead to reduced efficiency, so that the engine can not operate in the normal range of output power, increasing engine wear and aging. As far as possible to remove the dust and more areas, at the same time, air-conditioning grid should also pay attention to change.
Fuel system maintenance
The maintenance of the fuel system includes the replacement of the fuel filter according to the maintenance requirement, the removal of the sediment in the fuel filter screen, the proper maintenance of the oil tank and pipeline. When the engine is running in summer, a small amount of oil sludge is suspended in the oil, when the equivalent is large, the oil can be separated from the oil, which can clog the filter and the oil hole. It is very important to choose high quality fuel and synthetic diesel engine oil to reduce sludge production.
Unscheduled maintenance
The regular maintenance of the engine is very important, a lot of professional maintenance master said, in the maintenance of their vehicles in the maintenance of the engine caused by the failure of the total fault accounted for 50%. It can be seen that the engine maintenance plays an important role in prolonging the service life of the vehicle.
Not only in the conventional maintenance period to carry out engine maintenance, after driving through some special moisture or dust particularly large areas, to the engine parts to do some inspection and maintenance.