The long-term use of engine radiator hose aging, easily broken, if Baotou beiben heavy truck parts radiator inlet hose rupture, in driving the process, high temperature water splashing will form a large group of water vapor from the engine cover out. The occurrence of this phenomenon, should immediately select safe parking place, then take urgent measures to resolve. The following describes the emergency measures in this case:
In general, Baotou beiben heavy truck parts, radiator inlet, hose joints of the most easy to crack and Water Leakage, then you can use scissors to cut off the damaged parts, and then re inserted into the radiator inlet hose connector, and clip or wire clamp. If a hose in the middle can be taped with Water Leakage a wound before the hose is clean, such as Water Leakage parts after drying, the tape winding hose in Water Leakage, due to high water pressure when the engine works in the hose, so try to tape wrapped tightly. If there is no adhesive tape on the hand, you can also wrap the plastic paper on the crack, and then cut the old cloth into strips wrapped around the hose. Sometimes the hose is big, after the tie is still likely to leak, then the North Baotou heavy truck parts can be opened, to reduce the pressure in the channel, reduce leakage.
After taking the above measures, the engine speed can not be too fast, we should try to hang high-end driving, but also to pay attention to the water temperature in the hands of the pointer position, the water temperature is too high to stop cooling or cooling water supply.