Baotou beiben radiator accessories or expansion tank sharp turn water vapor, and the engine overheating “boil” from the perspective of phenomenon is very similar, but they are essentially different. “Water” is generally because the cylinder gasket adjacent to the hole in the cylinder damage, so that the combustion chamber and the water channel. When the piston compression or combustion, high pressure gas cylinder from the cylinder pad damage into the waterway, causing water from the water overflow pipe and the vent valve cover a large number of overflow, _ serious, with the intake stroke water is sucked into the cylinder, causing the engine to stop working, of course, the coolant will be reduced accordingly.
The reason
Cylinder head is not smooth, cylinder head bolt tightening torque is insufficient, or the use of bolts have been extended deformation and failed to compress the cylinder pad.
The cylinder or cylinder head defects such as trachoma, cavitation and water at the combustion chamber adjacent, cause permeability.
In the case of high temperature, the sudden increase of cold water, so that the cylinder or cylinder head of the channel cold induced cracks, resulting in high pressure gas channeling into the channel.
The diagnosis and treatment methods
Water is not affected by the temperature of the engine, even if the water temperature is not high, the expansion of the radiator or radiator cooling fluid will be fierce somersault, water vapor overflow.
With the speed of the engine increases, “intensified over water” phenomenon, and “boil” is not the existence of this phenomenon.
“Turning the water” is accompanied by a large reduction in coolant.
When the water is turned over, the water enters the cylinder, which causes the exhaust pipe to emit white smoke. What is more, there is too much water in the cylinder after the shutdown can not start.
The exhaust chamber of Baotou beiben air compressor accessories and the cylinder head jacket at the blisters, corrosion holes, also can make the compressed gas enters the water jacket and turn the water “”.
When the “water”, should first check whether there is air compressor cylinder leakage phenomenon Water Leakage.
If the Baotou beiben air compressor accessories without failure, can be used by cylinder oil method judging cylinder pad is washed out. This check, should open the tank cover is broken when the observation cylinder does not work, turn the water tank will stop, white smoke also improved the exhaust pipe, the cylinder gasket destroyed, should be promptly repaired, replace the cylinder head gasket.
If the check cylinder pad when no damage and no leakage can find traces, no blisters and cavitation hole, if there will be maintenance.