You can’t leave the car
North Ben V3 engine parts, especially in winter, should be allowed to idle for a period of time, in order to speed up the Supercharger Rotor before the full lubrication of lubricating oil bearings. So, just after the start can not be Meng Meng throttle, in order to prevent damage to the turbocharger oil seal.
Unable to extinguish immediately
After a long period of high-speed operation of the engine, idle speed should be 3 to 5 minutes and then flameout. When the engine is working, a part of the oil is supplied to the turbocharger rotor bearing for lubrication and cooling. The running engine suddenly stops, rapid decline of oil pressure is zero, high temperature turbocharger parts to the middle bearing shell of the heat can not be quickly away, while still in the inertia turbocharger rotor under the effect of rotating speed, therefore, the engine engine state if suddenly shut down, will cause the turbocharger in the stranded oil overheating and damage to the bearing and shaft. In particular, to prevent the sudden blow after a few feet throttle.
Keep clean
Timely clean beiben V3 accessories air filter, prevent dust and other impurities into the high-speed rotation of the compressor impeller speed, causing instability or sleeve and seal wear. Engine oil and filter must be kept clean to prevent impurities from entering, otherwise the oil lubricating capacity is reduced, resulting in premature termination of the turbocharger.
Removal of the North Ben V3 turbocharger parts, to keep clean, the pipe joints must be used to clean the cloth blocked, prevent debris into the supercharger, damage the rotor. The supercharger often under high temperature operation, the lubricating oil pipeline due to high temperature, the internal oil easy to have part of the coke, which will cause the supercharger bearing lubrication shortage and damage. Therefore, the lubricating oil pipeline should be cleaned after running for a period of time.