In the cold winter when the engine must be used correctly, because of slow oil, viscosity of oil film formation, wear is more serious, it will increase the cylinder wall and piston ring wear, shorten the service life of internal combustion engine. So when we use the winter Baotou beiben heavy truck accessories should pay special attention to the Weichai engine,
Specific measures are as follows:
In the winter when we started using it should pay attention to matters related to the inspection, we first have to do is check our Baotou beiben number of heavy truck accessories sump, the quality of lubricant and all connections when tightening, so that we can use the problems can better reduce, good preparation is the beginning of all work.
Baotou beiben heavy truck engine parts should first do the work in the preheating time to start using it, we has found that when 10 DEG C can quickly start the engine, and we through various practice, we recommend the use of internal combustion engine when everyone in the 3 DEG C, may achieve the best effect. The use of this method can be very good temperature rise and other related work.
What’s more, we suggest that we should increase our spare battery operation properly. Because once the occurrence of related accidents, we in the internal combustion engine starter drive will start earlier, a certain amount of oil, splashed all the lubricating oil surface, to meet the basic requirements of the motion pairs, to reduce component wear to between the new method but the capacity of battery consumption. And we should be aware of the same brand of lubricants, when it is reduced to 0 degrees from the temperature of 50 degrees C, the kinematic viscosity will drop to a small proportion of the original. Because it will make the combustion chamber temperature is too low, the fuel can not fully burn the coke, which will also increase the wear parts.