Transmission shift, the force used for each file is different, but if the shift force is too large, is a failure. It should be said that the shift occurred in the most difficult, the remote control device, if the shift is difficult, should first check the connection remote control rod, mostly connected with the fork wear, improper adjustment, bending, joint lubrication.
Sometimes the deformation of other parts will limit the free movement of the connecting rod. After the exclusion of the reasons for the connecting rod, the shift is still difficult problem exists, you need to remove the dual H device for inspection. Move shift guide block with screwdriver to engage gear. If the fork shaft can easily slide, transmission without fault. If the fork shaft sliding is very difficult, the fault in the transmission is inevitable.
Baotou beiben heavy duty truck accessories cause transmission by internal gearshift difficulties are as follows:
(1) the spline of the two shaft sliding sleeve is bitten on the spindle. This is mainly due to spindle distortion, fork bending or spindle spline bending caused by.
(2) Baotou beiben accessories shiftrail bite. This is mainly the transmission case rupture, shifting shaft locking screw tightening torque is too large, resulting in a shifting fork shaft bending, and the shifting fork shaft surface caused by the collision.
(3) Baotou beiben heavy duty truck accessories shift locking screw shaft on the loose.