The starter is used to start the engine, which is mainly composed of a motor, transmission mechanism (or engagement mechanism) and the starting switch is composed of three parts.
Do not turn the starter
The reason: the battery line break off, a wire loosening phenomenon: horn sound, lights not bright, light is bright but sometimes a starter is extinguished, measures: check the power line, shave rust and tighten the strap.
Reason: beiben V3 accessories start switch contact disc ablation, return spring break phenomenon: the horn sound normal, use a screwdriver to connect to start two main wiring column switch (the battery and the armature) is in normal operation, measures: replace the touch plate, spring, main contact surface grinding.
Two reasons: brush and stuck or inside the motor break phenomenon: the horn, short starting switch motor does not turn, repeatedly shorted starting switch after the starter temperature rise, brush contact and measures: check each connection point there is no spark.
The reason: the excitation coil or armature coil and a ground fault phenomenon: by a test fire when no spark, but the battery shell “touch fire starter armature” or “magnetic field” terminal spark strong measures: ground fault check the starter coil apart.
The reason: the engine resistance is too large or foreign body stuck phenomenon starter, the horn, short starting two main wiring column starter switch does not turn, but the temperature rise in the starter starter, “buzz” sound measures: ground fault torque wrench testing engine check coil
The reason: the pulling coil circuit, electromagnetic switch phenomenon: when the switch starter play only a small swing armature sound, magnetic switch maintenance measures.
The starter idling engine does not turn
Reason: one-way clutch failure phenomenon: when the starter speed is very high, a high speed rotation sound humming “, but the engine does not turn the measures: check the one-way clutch locking torque.
The reason: a one-way clutch buffer spring break or soft, starting with the impact phenomenon: gear scream, small gear can not enter the engagement position and measures: the replacement of the buffer spring.
Motor weakness
The reason: the excitation coil short circuit phenomenon: meshing sound, almost completely does not turn the crankshaft, the starter temperature rises fast, “buzz” sound measures: dismantling the excitation coil.
Reason: ground contact is not good or the battery line is too long, the phenomenon: every time can make the starting rotation of the crankshaft, but the speed is too low, then forced to stop, commonly known as “blind” measures: get rid of rust with short battery wire bonding
Reason: North rush V3 accessories battery loss or temperature is too low, the phenomenon: starting speed is low, after two or three consecutive start, the full drag does not turn the crankshaft, measures: to do additional charging for storage battery.
Nie entering tone, no moving sound
Reason: keep the coil wire, starting switch phenomenon: “Da Da” sound, the starter just turn to stop, maintenance measures: keep the coil.
The reason is: the excitation coil short circuit fault phenomenon: the starting switch starter only powerful, hum, sometimes the crankshaft can be impulsive, measures: dismantling the excitation coil.
The reason: the battery is a serious loss of electricity, the starting switch phenomenon: “Da Da” sound continuously without any signs of turning, measures for battery.
After starting the sharp whistle or small gear exit difficulties
The reason: a one-way clutch clamping phenomenon after starting the engine is screaming, starter by anti application of high speed rotary, maintenance measures: one-way clutch.
Reason: beiben V3 Starter Accessories Installed improperly, backlash is too small, the phenomenon of gear meshing: after starting the chorus for a long time, like a distant siren, measures: reinstall the starter, the side gap larger.