In the hot summer, I believe many brothers have met the high temperature of the engine water temperature, except for the common heat sink because of foreign body clogging, fan clutch damage and other reasons, the other small parts of our engine can not be ignored, it is a thermostat.

The role of the North Baotou Mercedes Benz fittings temperature device is to adjust the water of the radiator automatically according to the high and low of the coolant, adjust the cooling power of the engine cooling system, and make the temperature of the engine in the best working range. To put it simply, it is a small part of the engine's cooling water temperature which is relatively constant. Whether it is normal or not is directly related to the temperature of our engine. In the normal work of the thermostat, in the stage of high load, such as climbing, the temperature of the water will rise to a certain degree, and it will return to normal once the temperature of the flat road is fast. But some brothers may meet this situation. The water temperature is normal when the flat road is small, but the temperature will soar slightly with a little load, and the time of cooling is relatively long after returning to the flat road.

With hand touch Baotou North Mercedes Benz accessories radiator of the upper and lower water pipes have temperature, in such case it is easy to produce fault misjudgement, that the fan clutch is bad or the radiator is blocked, in cleaning and replacing the parts after the problem is still. In such cases, it may be the phenomenon of thermostat card issuing. Therefore, after the above phenomena occur, the thermostat can be considered first.

The inspection method is also very simple, the thermostat is removed from the car and put in the pot to boil, to observe whether the north of Baotou Mercedes Benz fittings is open with the increase of water temperature, there is no hairpin phenomenon in the middle. If the thermostat on your car is turned through the skirt movement to close the small cycle.

We are not easy to drive the truck, after all, the vehicle is a combination of N parts and components together, it is unavoidable to have some problems, but we do not blindly change parts after the problem, to find the root of the problem to the root of the remedy, we have to use the least money to solve the problem is the right path.